Sounder – Fire & Safety WA

Addressable Loop Powered Sounder

AJBPIKE — Sun, 07 Oct 2018 13:29:25 +0000

MX Loop Powered Sounders use MX TECHNOLOGY communications for control and power. Indoor models are available in red or white. The outdoor model is in red. With these loop powered sounders, supervision is accomplished using MX loop communications and the sounders can be activated from the MX Control Panel. The tone and volume is selected at the sounder using the MX 850EMT. • MX Loop powered with internal isolator, separate voltage is not required
• Available for indoor mounting in red or white and for outdoor mounting in red
• Indoor and outdoor sounders include a matching surface mount box with tamper resistant latch (release tool is included)
• Selectable output volume of 90dB or 103dB
• Sounders on the same MX Loop are synchronised when using the 4100ESi coding option
• Output tone patterns are selectable from 16 choices including: Temporal3 (880Hz), Slow Whoop (500 to 1200Hz), conventional Bell, or Continuous
• Address and sounder selections are easily programmed with the MX 850EMT Engineering Management Tool

LPSY800R – Addressable Loop Powered Sounder

AJBPIKE — Sun, 07 Oct 2018 13:29:25 +0000

LPSY800W – Addressable Loop Powered Sounder

AJBPIKE — Sun, 07 Oct 2018 13:29:25 +0000

LPSY865R – Addressable Loop Powered Sounder

AJBPIKE — Sun, 07 Oct 2018 13:29:25 +0000

LPAV800R – Addressable Loop Powered Sounder Beacon

AJBPIKE — Sun, 07 Oct 2018 13:29:25 +0000

LPAV800W – Addressable Loop Powered Sounder Beacon

AJBPIKE — Sun, 07 Oct 2018 13:29:25 +0000

LPAV865 Addressable Sounder Beacon Outdoor IP65

AJBPIKE — Sun, 07 Oct 2018 13:29:25 +0000

MX Mk2 Loop Powered Sounder Base

AJBPIKE — Sun, 07 Oct 2018 13:28:57 +0000

The 802SB/901SB Addressable Sounder Bases provide a sounder function on MX addressable systems. Designed for indoor use, they require an associated detector in order to operate, as each base is controlled by its detector. The detector must be locked onto the sounder base using the detector locking device. Removal of the detector or loss of power to the loop will cause the sounder to cease sounding. It must be fixed to a flat ceiling or a suitable electrical backbox with 50mm fixing centres. The loop powered 802SB is identified by a white park clip. Up to fifty1 802SBs per loop may be operated at full volume at any one time. The 901SB requires an external 24Vdc supply and is identified by a blue park clip. The 802SB/901SB supports ISO8201 T3 tones.

Specifications
– Operating Voltage 20 to 40Vdc
– Quiescent Current 200µA (max.)
– Alarm Current 6.8mA (max. volume)
– Sound Pressure Level 90dBA (max. volume)
– Ambient Temp -25°C to +70°C
– Relative Humidity 10% to 95% (non cond.)
– Devices per loop 50 to 200*
– ActivFire Listed with MX4428 (afp-1446)

* Assuming all 802SBs operate simultaneously: 50 per loop (High volume); 200 (Low). Refer to relevant manual for design limits. Note that the 802/901SB cannot plug into a 5B Base or 5BI Isolator base.

SAM800 Sounder Driver Module

AJBPIKE — Sun, 07 Oct 2018 13:28:57 +0000

The Sounder Addressing Beacon SAB801 and Sounder Addressable Module, SAM800 are designed to control an MX loop powered sounder base or relay base for use with compatible MX CIE. The SAB801 has an integral high intensity red LED beacon that can be separately controlled to the base. The beacon can be configured to illuminate continuously or flash at 1Hz, although there is no facility to synchronise several SAB801 beacons. The SAB801 and SAM800 supply the address decoding in place of a detector, thus providing a remotely controlled beacon and sounder when used in conjunction with an 802SB.

Specifications
– Quiescent Current 250µA
– Alarm Current 250µA1*
– Max. device/Loop 200/250**
– Flash Rate
– Dims (Dia.x H mm) 108 x 22
– Weight 70g
– Ambient Temp. -10°C to +55°C
– Relative Humidity 10% to 96% (non-cond.)
– ActivFire Listing afp-1446
– FPANZ Listed VF/656

* In addition to associated sounder/relay current.
** Maximum number of devices between 4BI bases is limited to 40 for AS 1670.1-2004 systems.

SAB801 Sounder Address LED Beacon

AJBPIKE — Sun, 07 Oct 2018 13:28:57 +0000

Specifications
– Alarm Current 325µA1
– Flash Rate Cont or 1Hz
– Dims (Dia.x H mm) 108 x 32
– Weight 70g
– Ambient Temp. -10°C to +55°C
– Relative Humidity 10% to 96% (non-cond.)
– FPANZ Listed VF/420