MX – Fire & Safety WA

814CH MX Carbon Monoxide/Heat Detector c/w coating Thermistor (UK)

AJBPIKE — Sun, 07 Oct 2018 13:28:29 +0000

The 814CH is a state-of-the-art combined CO and heat detector that allows a full set of detection modes to be implemented in the MX fire alarm panels to suit most fire detection applications. The 814CH is particularly well suited to areas and applications where smoke detector positioning is difficult or where smoke detectors are prone to false alarm. The 814CH uses a reliable electrochemical cell for the detection of CO. The integrated heat sensor monitors rate-of-rise and fixed temperature and has been tested as a stand alone heat detector.

The 814CH can operate in a wide variety of applications where combined risks mean that heat or CO detection alone would be insufficient. The 814CH has all the features of MX VIRTUAL detectors including self verification, temperature and CO level indication and superior service functions.

Specifications
– Operating Voltage 20 to 40Vdc
– Quiescent Current 275µA (typ.)
– Alarm Current 10mA with LED on
– Remote Indicator Tyco E500 Mk2
– Relative Humidity 15% to 90% (n/cond)
– Ambient Temperature 0°C to +50°C*
– Dimensions 109 dia x 43 h mm
– Weight 88g
– FPANZ Listed VF/337

* The 814CH may be operated between 0 and -20°C for short periods but with reduced performance

814P MX Photo Optical Smoke Detector

AJBPIKE — Sun, 07 Oct 2018 13:28:29 +0000

The 814P is a state-of-the-art smoke detector using a photoelectric sensor which, in conjunction with the MX fire indicator panel (CIE), suits most fire detection applications including smoke management systems. The smoke sensors incorporate a unique
“mousehole” design optical chamber with superior signal to noise ratio providing high resilience to dust and dirt which means reduced service costs. A unique chamber cover actually draws slow moving smoke into the chamber to provide a more responsive detector.

The 814PH adds a heat sensor which allows a full set of detection modes to be implemented in the MX CIE. The heat sensor monitors temperature and has been tested as a detector in its own right. The 814P & 814PH have all the features of MX VIRTUAL detectors including self verification, temperature and smoke level indication and superior service functions.

Specifications
– Operating Voltage 20 to 40Vdc
– Quiescent Current 275µA (typ.)
– Alarm Current 10mA with LED on
– Remote Indicator Tyco E500 Mk2
– Relative Humidity 10% to 95% (n/cond)
– Ambient Temp. – 25°C to +70°C
– Dimensions 109 dia x 43h mm
– Weight 76g
– ActivFire Listed afp-1699
– FPANZ Listed VF/342

814PH MX Photo & Heat Multi Detector c/w coating Thermistor (UK)

AJBPIKE — Sun, 07 Oct 2018 13:28:29 +0000

814I Ionisation Smoke Detector

AJBPIKE — Sun, 07 Oct 2018 13:28:29 +0000

Tyco 814I detectors are offered for old specifications which still call for ionisation smoke detectors. The 814CH and 814PH detectors offer improved performance and lower false alarms for most smoke detection applications. The 814I nevertheless offers reliable detection of visible and invisible fire aerosols using a dual ionisation chamber in which the air is ionised by a single radioactive source.

In combination with the SmartSense algorithm, the 814I provides early detection of hot smouldering and flaming fires, such as wood, paper etc. Warning: these detectors contain a small amount of radioactive material (typically <33.3kBq Americium 241). They are safe when used as prescribed. Handling, transport and disposal must be done in accordance with Health Department regulations. Specifications - Operating Voltage 20 to 40Vdc - Quiescent Current (typical) 330µA - Alarm Current (max.) 10mA with LED on - Radioactive Source 33.3kBq Am241 - Remote Indicator Tyco E500 Mk2 - Relative Humidity 10% to 95% (n/cond) - Ambient Temperature -25°C to +70°C - Airflow (max.) 2.5 m/sec - Dimensions 109 dia x 43H mm - Weight 81g - ActivFire Listed afp-1426 - FPANZ Listed VF/336