Monitor – Fire & Safety WA

Stream Shaper Akron 485 2.5″ NH

AJBPIKE — Sun, 07 Oct 2018 13:09:44 +0000

Inlet: 1.5″ (38mm)
Outlet: 2.5″ (65mm)
Length: 4″ (100mm)
Weight: 3 lbs 12 oz (1.7kg)

Hydraulic Motor Suit Severe Duty Monitor

AJBPIKE — Sun, 07 Oct 2018 13:09:44 +0000

The Severe-Duty, multi-purpose monitor is designed to withstand continuous operation while mounted on heavy-duty equipment like off-road fire, construction, mining, or landfill vehicles. It is designed to survive Dusty, dirty, outdoor, and continuous vibration applications. Excellent for fixed site non-classified wash down or fire protection applications.

– Hydraulic motor flow 1/2 gpm @ 500 psi
– Stainless construction
– 320° rotation
– 155° elevation (+90°, -65°)
– Fast travel, 20°/ sec
– Pressures up to 200 psi
– 2 1/2″ waterway (65 mm)
– Reaches 200′ at 750 gpm

Applications/Solutions
– Mining

Foam Nozzle Self Educting TFT ZMF32A 2000 Lpm

AJBPIKE — Sun, 07 Oct 2018 13:09:44 +0000

The Task Force Tips’ MASTER FOAM nozzle is a simple and rugged self-educting foam nozzle with superior stream quality and reach. This fixed gallonage fog nozzle rated at 100 psi (7 bar) is available with your choice of 250, 350, 500 or 750 gpm (950, 1300, 2000, 3000 l/min). Fog angle is user adjustable between 90º wide fog and straight stream. The nozzle’s baffle is easily removed for flushing debris. The standard swivel coupling is 2.5″ NH, NPSH, or BSP (65mm) female threads. The simple flow geometry (patent pending) can educt foam concentrate at .5%, 1%, 3%, or 6% with no small passages to clog. Percentage is easily set with an interchangeable orifice plate. A set of calibrated foam orifice plates is included. Nozzle comes with an industrial grade UV resistant, 8 feet long, 1.5″ diameter (2.4m x 38mm) concentrate hose with a cam lock fitting for quick and secure attachment to the nozzle. The simple and basic design requires no grease or other maintenance. The halo ring/stream shaper is made from non-corroding high temperature polymer. The rubber bumper is UV resistant. The MASTER FOAM self-educting nozzle is available in hardcoat anodized ANSI A356.0.T6 aluminum. All MASTER FOAM nozzles accept the FJ-LX-M FOAMJET low expansion air-aspirating attachment.

Weight: 5.000 lbs ( kg)

Nozzle Akron 4445 Master Stream 2.5″ NH 1900 Lpm

AJBPIKE — Sun, 07 Oct 2018 13:09:44 +0000

The Mercury nozzles have excellent straight stream performance and a wide, dense, fully adjustable fog pattern.

– Pyrolite Material
– Manual Pattern Control
– 500 gpm (1900 lpm) flow at 100 PSI (7 bar)
– 2 1/2″ (65 mm) Inlet
– Spinning Teeth
– 7″ (178 mm) long 5 lbs. (2.3 kg.)

Nozzle Akron 4447 Mercury 2.5″ NH 1900 Lpm

AJBPIKE — Sun, 07 Oct 2018 13:09:44 +0000

The Mercury nozzles have excellent straight stream performance and a wide, dense, fully adjustable fog pattern.

– Pyrolite Material
– Manual Pattern Control
– 250,375,500 gpm (950,1400,1900 lpm) flow at 100 PSI (7 bar)
– 2 1/2″ (65 mm) Inlet
– Spinning Teeth
– 7″ (178 mm) long 5 lbs. (2.3 kg.)

Nozzle Akron 4452 Aquastream 2.5″ NH 1900 Lpm

AJBPIKE — Sun, 07 Oct 2018 13:09:44 +0000

A fixed gallonage master stream nozzle designed for heavy-duty use on fixed monitors.
– With grease fitting
– Pyrolite Material
– Manual Pattern Control
– 500 (300 & 700) GPM flow at 100 PSI (7 bar); 1900 (1140 & 2650 lpm) * Field changeable spacers included with nozzle
– 2 1/2″ (65 mm) Inlet
– Fixed Teeth
– 7″ (17.8 cm) long
– 4 3/4 lbs. (2.2 kg)

Nozzle Akron 4461 Rampage 2.5″ NH 2800 Lpm

AJBPIKE — Sun, 07 Oct 2018 13:09:44 +0000

A fixed gallonage master stream nozzle with built-in stream shaper designed for flows up to 1250 gpm. Ideal for heavy-duty use on fixed monitors.

– Brass Material
– Manual Pattern Control
– 750 (500, 1000, & 1250) GPM flow at 100 PSI (7 bar) *Factory set to 750 gpm – field changeable to 500 or 1000 gpm, spacers included with nozzle. Must specify 1250 gpm.
– 2 1/2″ (65 mm) Inlet
– No Teeth
– 9″ (229 mm) Long
– 23 1/4 lbs. (10.5 kg)
– FM Approved

Applications/Solutions
– Defense & Homeland Security

Monitor Ansul MM-1000-3 3785 Lpm

AJBPIKE — Sun, 07 Oct 2018 13:09:17 +0000

The MM-1000 is designed to deliver approximately 1,000 GPM (3785 LPM), however, actual flow rate is dependant on nozzle choice. This monitor is constructed of continuous tubing which produces less friction loss and better stream reach. The balanced design reduces unwanted torque and swing, while the range of movement is easily operated with the single tiller bar.

– Waterway: 3 in. nominal continuous tubing
– Nozzle: Use of Spitfire, D5 or AFN-1 Series nozzle recommended
– Sweep (rotation): Full 360°
– Elevation: 140° total vertical movement. (+90° elevation, –50° depression)
– Nozzle Threads: Male 2 1/2 in. – 7 1/2 TPI NHT, stainless steel
– Mounting: 3 in., 150 lb. ANSI flange standard. Optional 4 in., 150 lb. ANSI flange
– Finish: Red polyurethane paint
– Material: Durable carbon steel. Optional stainless steel model available (unpainted)
– Stability: Lock knobs for sweep (rotational) and elevation (vertical) movements
– Weight: 38 lb. (17.2 kg) with 3 in. flange; 40 lb. (18.1 kg) with 4 in. flange, not including nozzle. Shipping weight: 45 lb. (20.4 kg)

Monitor Ansul MM-1000-4 SS 3785 Lpm

AJBPIKE — Sun, 07 Oct 2018 13:09:17 +0000

Severe Duty Monitor Akron 3524 3″ Flange x 2.5″ NH 4800 Lpm

AJBPIKE — Sun, 07 Oct 2018 13:09:17 +0000

The Omega SD Severe Duty brass monitors utilize a unique ball bearing free joint design ideal for high usage applications.

– Ideal for high usage applications – Mining – Tank Cleaning – Equipment Wash Down
– New longer tiller bar that can be mounted in 30 degree increments for increased control
– Extensive duty-cycle use
– Brass & stainless steel construction
– Cast in turning vanes
– Unique severe-duty joint design – Maximum Flow: 1250 gpm (4800 lpm) – Maximum Pressure: 200 psi (14 bar)
– Articulation: 360° Horizontal -90° to +90° Vertical – Friction Loss 12 psi @ 1000 gpm