Laser – Fire & Safety WA

VESDA VLQ Surface Mount Kit

AJBPIKE — Sun, 07 Oct 2018 13:35:11 +0000

The Surface Mount Kit is for the VESDA VLQ detector. It is a lightweight unit designed to be ceiling or wall mounted and operates with a simple sampling pipe network. Depending on the type of surface, the VESDA VLQ detector can be installed in different ways to suit envrionmental, aesthetic and local code requirements.

VESDA VLQ Flush Mount Kit

AJBPIKE — Sun, 07 Oct 2018 13:35:11 +0000

The Flush Mount Kit is for the VESDA VLQ detector. It is a lightweight unit designed to be ceiling or wall mounted and operates with a simple sampling pipe network. Depending on the type of surface, the VESDA VLQ detector can be installed in different ways to suit envrionmental, aesthetic and local code requirements.

VESDA VLQ Replacement Filter

AJBPIKE — Sun, 07 Oct 2018 13:35:11 +0000

The VESDA VLQ detector operates based on a laser-based absolute smoke detection with clean air barrier for optics protection, and a dual stage field replaceable filter cartridge. The VESDA VLQ will illuminate an indicator to replace the filter with information of the used filter.
The VESDA VLQ Replacement filter will allow for the Laser Detection Chamber component of the VLQ detector to incorporate a separate secondary clean air feed through to provide for clean air barriers across critical detector optics to safeguard against internal detector contamination.

VESDA VLQ Replacement Filter Pack 20

AJBPIKE — Sun, 07 Oct 2018 13:35:11 +0000

VESDA VLQ 2 Pipe Stubs and End Caps

AJBPIKE — Sun, 07 Oct 2018 13:35:11 +0000

The VLQ detector actively draws air from the protected area through a pipe network where two or four holes are used. The VLQ has two pipe inlets and there are always one or two holes on each pipe. Sampled air is then filtered before being analyzed by the detection chamber.
The VESDA VLQ Pipe Stubs and End Caps helps to adapt the VLQ to suit both high and normal sensitivity applications and offers many installation advantages in terms of out-of-box operation, stand-alone functionality and simplified pipe network.

VESDA VLQ-100 Demo Kit (inc Pipes, PSU, Carry Case)

AJBPIKE — Sun, 07 Oct 2018 13:35:11 +0000

The VESDA VLQ-100 Demo Kit consists of a VLQ-100 detector, pre-drilled pipes and power supply fitted in a carry case.

VLI Secondary Filter Spare Part

AJBPIKE — Sun, 07 Oct 2018 13:35:11 +0000

With over 35 years proven market leadership, VESDA VLI was created to provide an effective and reliable Very Early Warning Smoke Detector designed to meet the specific and unique challenges of Industrial applications and harsh environments and designed to:

Withstand harsh environmental conditions
Maintain its sensitivity over the life of the detector
Provide best in class detection performance
Provide a lower TCO
The design of Industrial VESDA VLI enables the product to be deployed into many industrial applications without special application engineering, system design support and enhanced maintenance procedures that were previously required. Key features that enable deployment into these environments include:
– World’s first patented fail-safe intelligent filter to eliminate the need for external filters and significantly extend service life
– Inertial secondary filtration removes large dust particles thereby further extending detector service life and safeguarding against nuisance alarms
– IP66 enclosure to provide protection from the environment eliminating the need for costly enclosures
– Extending total aggregate sampling pipe capability up to 360 m (1,181 ft) to cover larger areas with fewer detectors

Another industry first is the 100% modular design. This enables field replacement of individual detector components reducing down time and spare part inventory. No longer does the entire detector have to be replaced.

Fundamental to Industrial VESDA VLI’s ability to provide consistent performance throughout its service life is the use of VESDA’s patented absolute detection technology, that uses a clean air barrier to keep the components of the optical detection chamber clean. In addition, a new, innovative and patented Clean Air Zero feature provides the highest degree of detector stability, while maintaining absolute smoke detection.

VESDA does not rely on any “predictive” algorithms to compensate for short term or long term drift. These approaches inevitability lead to degraded detector performance and extended detection times, if not missing fire events completely.

VESDA VLI with VESDAnet

AJBPIKE — Sun, 07 Oct 2018 13:34:42 +0000

The VESDA VLI with VESDAnets is an industry first early warning aspirating smoke detection (ASD) system, designed to protect industrial applications and harsh environments of us to 2000m^2 (21,520 sq. ft.). The VLI detector combines a fail-safe Intelligent Filter (patent pending) with an advanced clean-air barrier for optics protection allowing the use of absolute detection and a long detection chamber life without the need for re-calibration.

Specifications
Supply Voltage: 18 – 30VDC
Power Consumption: 10W (Quiescent), 10.5 W with alarm (max)
Current Consumption: 415mA Quiecent, 440mA with alarm (max)
Fuse Rating: 1.5 A
Dimensions (WHD): 426.5mm x 316.5mm x 180mm
Weight: 6.035kg

VESDA VLI with Relays and Ethernet Only

AJBPIKE — Sun, 07 Oct 2018 13:34:42 +0000

The VESDA VLI with Relays and Ethernet Only is an industry first early warning aspirating smoke detection (ASD) system, designed to protect industrial applications and harsh environments of us to 2000m^2 (21,520 sq. ft.). The VLI detector combines a fail-safe Intelligent Filter (patent pending) with an advanced clean-air barrier for optics protection allowing the use of absolute detection and a long detection chamber life without the need for re-calibration.