KAC – Fire & Safety WA

KAC Manual Call Point Test Key (Pack of 10)

AJBPIKE — Sun, 07 Oct 2018 13:30:22 +0000

Packet of ten Test keys for Tyco MCPs

KAC RED Manual Call Point

AJBPIKE — Sun, 07 Oct 2018 13:30:22 +0000

The SU0631 Manual Call Point is supplied with one normally open and one normally closed contact. Selecting either the “Normally Open” or “Normally Closed” contact is easily achieved by simply connecting the terminal block to the required connection in the back of the MCP. Single pole changeover switching can be achieved with the use of two terminal blocks. The call point is operated when the frangible glass element is snapped, releasing the MCP’s micro switch, which signals an alarm to the fire panel. The Call Point and Backbox are ordered separately. Unless stated the Tyco indoor manual call points are supplied as flush mount units. The Tyco range are approved for use with the standard backbox if surface mounting is required.

Specifications
– Max. Operating Voltage 30Vdc
– Max. Switch Current 2A
– Cable Termination 0.5 to 2.5 mm2
– Relative Humidity 0 to 95% (non/cond)
– Ambient Temperature -10°C to +55°C
– Dimensions (HWD) 93 x 89 x 60mm
– Weight 110g (flush)
– Ingress Protection IP24D
– ActivFire Listed afp-1385

KAC RED Manual Call Point (back box only)

AJBPIKE — Sun, 07 Oct 2018 13:30:22 +0000

Red backbox

Specifications
Ambient Temprature -10°C to +55°C
Dimensions (HWD) 86 sq x 32 mm

KAC Manual Call Point Plastic Insert Element

AJBPIKE — Sun, 07 Oct 2018 13:29:54 +0000

Flexible plastic element

Specifications
Dimensions 75w x 40h typical

KAC Manual Call Point – IP67 Weatherproof/Special Environment Unbranded

AJBPIKE — Sun, 07 Oct 2018 13:29:54 +0000

This surface mounting Manual Call Point has an Ingress Protection rating of IP67, making it suitable for wet area applications. The callpoint is operated by simply pressing on the centre of the frangible element until it snaps, which releases a microswitch, signaling an alarm at the CIE. A plastic coated frangible element ensures safe and reliable operation, and does not produce dangerous glass shards. The SU0634 is supplied with one normally – open and one normally – closed contact. Selecting either configuration is achieved by locating the terminal block on the appropriate connection. Single pole change-over switching can be achieved using two terminal blocks.

Specifications
– Operating Voltage 30Vdc (max.)
– Switch Current 2A @ 30Vdc (max.)
– Cable Termination 0.5mm2 to 2.5mm2
-Dimensions (HWD) 93x98x76 mm
– Weight 270g
– Ambient Temperature -30°C to +70°C
– Relative Humidity up to 95% (non-cond.)
– Ingress Protection IP67
– Not ActivFire listed by Tyco