The Frontliner FX-series are outfitted with detachable jaws that can be either replaced by pulling jaws, or turns the tool into a dedicated cutter. Once turned into a dedicated cutter you immediate enjoy the benefits of the advanced blade design and performance equal to the cutter G-series.

Using Optimized 350 bar offers a significant benefit for combitools. In case of high pressure operated combitools the noticeable lower force when spreading is overlooked by the industry. Using less pressure has provided us with a lot more force in the return motion. In practice, this means great spreading performance.

FX6 Frontliner Specifications
Dimensions (L x W x H) 859 x 306 x 265 mm
Operational weight 19.3 kg
Max. cutting opening 300 mm
Reach 142 mm
Max. cutting force 1,251 kN / 127.5 ton
Max. spreading opening 374 mm
Max. spreading force at base of jaw 176.3 kN / 17.8 ton
Max. spreading force 25 mm from tips 81.6 kN / 8.3 ton
Max. pulling opening 375 mm
Max. pulling force 97.8 kN / 9.9 ton

The Frontliner FX-series are outfitted with detachable jaws that can be either replaced by pulling jaws, or turns the tool into a dedicated cutter. Once turned into a dedicated cutter you immediate enjoy the benefits of the advanced blade design and performance equal to the cutter G-series.

Using Optimized 350 bar offers a significant benefit for combitools. In case of high pressure operated combitools the noticeable lower force when spreading is overlooked by the industry. Using less pressure has provided us with a lot more force in the return motion. In practice, this means great spreading performance.

FX2 FRONTLINER Specifications
Dimensions (L x W x H) 679 x 224 x 246 mm
Operational weight 10.4 kg
Max. cutting opening 195 mm
Reach 96 mm
Max. cutting force 340 kN / 34.7 ton
Max. spreading opening 271 mm
Max. spreading force at base of jaw 94.7 kN / 9.7 ton
Max. spreading force 25 mm from tips 33.2 kN / 3.4 ton
Max. pulling opening 273 mm
Max. pulling force 41.4 kN / 4.2 ton

The Frontliner FX-series are outfitted with detachable jaws that can be either replaced by pulling jaws, or turns the tool into a dedicated cutter. Once turned into a dedicated cutter you immediate enjoy the benefits of the advanced blade design and performance equal to the cutter G-series.

Using Optimized 350 bar offers a significant benefit for combitools. In case of high pressure operated combitools the noticeable lower force when spreading is overlooked by the industry. Using less pressure has provided us with a lot more force in the return motion. In practice, this means great spreading performance.

FX2 FRONTLINER Specifications
Dimensions (L x W x H) 679 x 224 x 246 mm
Operational weight 10.4 kg
Max. cutting opening 195 mm
Reach 96 mm
Max. cutting force 340 kN / 34.7 ton
Max. spreading opening 271 mm
Max. spreading force at base of jaw 94.7 kN / 9.7 ton
Max. spreading force 25 mm from tips 33.2 kN / 3.4 ton
Max. pulling opening 273 mm
Max. pulling force 41.4 kN / 4.2 ton

The Frontliner FX-series are outfitted with detachable jaws that can be either replaced by pulling jaws, or turns the tool into a dedicated cutter. Once turned into a dedicated cutter you immediate enjoy the benefits of the advanced blade design and performance equal to the cutter G-series.

Using Optimized 350 bar offers a significant benefit for combitools. In case of high pressure operated combitools the noticeable lower force when spreading is overlooked by the industry. Using less pressure has provided us with a lot more force in the return motion. In practice, this means great spreading performance.

FX4 Frontliner Specifications
Nominal pressure UltimatePressure 5,075PSI
Tailhose safety factor 8:1 (40,600PSI)
Dimensions (L x W x H) 30 1/8″ x 9 1/2″ x 9 3/4″
Operational weight 31.3lbs
Max. cutting opening 10 3/8″
Reach 5 5/8″
Max. cutting force 109,706lbs/54.9 US ton
Max. spreading opening 12 5/8″
Spreading force at base of jaw 11,914-17,197lbs/6.0-806 US ton
Spreading force 1’’ from tips 8,183-9,105lbs/4.1-4.6 US ton
Max. pulling opening 12 7/8″
Pulling force 7,846-11,285lbs/4.9-5.6 US ton
EN 13204 BK36-320H-14
NFPA 1936 A6 B7 C6 D7 E7

NO HYDRAULICS
Hydraulic systems overheat which can create all kinds of problems. The current integrated tools have little room (small reservoir) needed to cool down the hydraulic fluid in its system. This limits the running time. EDD is not affected by heat issues. It therefore can provide much longer running time. EDD works well in hot and cold environments. Its high durability requires little to no maintenance.

LONG RUNNING TIMES
Each tool is powered by the latest lithium-Ion technology. The battery conforms to the IEC 62133 safety standards and the UN 38.3 shipping requirements for lithium batteries. The motor technology leveraged in EDD produces more than a staggering 1.4kW which is similar to a small gasoline engine currently used in hydraulics pumps. The motor runs close to 90% efficiency and drives a robust screw or in the case of the P4 a robust gearbox. Nothing more is needed.

FULL VARIABLE SPEED
Hydraulic systems do not allow full control over its speed. EDD does; it lets you be in full control of its speed. The control handle works similar to an accelerator; just open it for optimum control.

OPTIMAL SAFETY – NO PRESSURE OR COMPRESSION
EDD contains no hydraulic fluid under pressure nor a pump or seals. A less obvious though important advantage is the lack of compression within the system. Compression of hydraulic fluid creates spring reaction forces. EDD has no such fluid compression. It is the safest choice for rescuers..

ALL-WEATHER PROOF
A rescue tool must be all-weather proof. The ingenious design and military grade connector with IP66 value and rating makes these new tools most suited to work in heavy rain showers.

DIRECT FORCE FOR INCREAED PERFORMACE
Integrated Hydrawulic rescue tools get force by building up pressure. EDD is direct; it delivers a constant maximum force. The tool’s reaction and response is immediate for great cutting and spreading performance.

P4FX FRONTLINER EDD
Specifications
Nominal input 43.2 VDC
Dimensions (L x W x H) 765 x 271 x 274 mm (±10 mm)
Rear 360° carry handle Optional (Art. Nr. 4250.1065)
Operational weight incl. Battery Pack 1 21.8 kg (±0.2 kg)
Operational weight incl. Power Connector 21.2 kg (±0.2 kg)
Weight excl. battery 20.8 kg (±0.2 kg)
Weight excl. battery and excl. combi arms 14.4 kg (±0.2 kg)
Rotating head angle 61°
Max. spreading opening 319 mm
Spreading force at base of jaw 63.5 – 130.0 kN / 6.5 – 13.3 ton
Spreading force 25 mm from tips 47.8 – 77.6 kN / 4.9 – 7.9 ton
Max. cutting opening 236 mm
Reach 96 mm (±5 mm)
Max. cutting force 371 kN / 37.8 ton

The Frontliner FX-series are outfitted with detachable jaws that can be either replaced by pulling jaws, or turns the tool into a dedicated cutter. Once turned into a dedicated cutter you immediate enjoy the benefits of the advanced blade design and performance equal to the cutter G-series.

Using Optimized 350 bar offers a significant benefit for combitools. In case of high pressure operated combitools the noticeable lower force when spreading is overlooked by the industry. Using less pressure has provided us with a lot more force in the return motion. In practice, this means great spreading performance.

Dimensions (L x W x H) 859 x 306 x 265 mm
Operational weight 19.3 kg
Max. cutting opening 300 mm
Reach 142 mm
Max. cutting force 1,251 kN / 127.5 ton
Max. spreading opening 374 mm
Max. spreading force at base of jaw 176.3 kN / 17.8 ton
Max. spreading force 25 mm from tips 81.6 kN / 8.3 ton
Max. pulling opening 375 mm
Max. pulling force 97.8 kN / 9.9 ton

The Frontliner FX-series are outfitted with detachable jaws that can be either replaced by pulling jaws, or turns the tool into a dedicated cutter. Once turned into a dedicated cutter you immediate enjoy the benefits of the advanced blade design and performance equal to the cutter G-series.

Using Optimized 350 bar offers a significant benefit for combitools. In case of high pressure operated combitools the noticeable lower force when spreading is overlooked by the industry. Using less pressure has provided us with a lot more force in the return motion. In practice, this means great spreading performance.

Dimensions (L x W x H) 765 x 244 x 246 mm
Operational weight 13.8 kg
Max. cutting opening 257 mm
Reach 143 mm
Max. cutting force 488 kN / 49.7 ton
Max. spreading opening 320 mm
Max. spreading force at base of jaw 76.5 kN / 7.8 ton
Max. spreading force 25 mm from tips 40.5 kN / 4.1 ton
Max. pulling opening 327 mm
Max. pulling force 50.2 kN / 5.1 ton