EWIS – Fire & Safety WA http://fireandsafetywa.com.au Mon, 31 Aug 2020 02:10:12 +0000 en-AU hourly 1 https://wordpress.org/?v=5.2.16 http://fireandsafetywa.com.au/wp-content/uploads/2018/04/cropped-favicon-32x32.png EWIS – Fire & Safety WA http://fireandsafetywa.com.au 32 32 TPS 2 Core Cable http://fireandsafetywa.com.au/product/tps-2-core-cable/ Tue, 16 Oct 2018 13:18:13 +0000 https://fireandsafetywa.com.au/product/tps-2-core-cable-2/ Our TPS cables are ideally suited for Fire Alarm, OWS and EWIS systems. The cables are double insulated and have an outer sheath which is easy to strip and terminate.

In addition to the basic flat design, a white stripe cable is available to distinguish between speaker and detection circuits. Twisted cable is ideal for the connection of addressable fire panels to detectors and devices. The twisted screen version is ideal for VESDA networks and other communication networks.

]]> Fire Rated 2 Core Cable http://fireandsafetywa.com.au/product/fire-rated-2-core-cable/ Tue, 16 Oct 2018 13:18:13 +0000 https://fireandsafetywa.com.au/product/fire-rated-2-core-cable-2/ Our Fire Rated cables have been specifically designed for use with Australian Fire Alarm and Evacuation systems. The cables have a reduced outside diameter which allows 2 cables to fit within a single conduit providing ease of installation. The cable’s 7 stranded copper conductors and firm insulation material also allows for neat placement on cable trays and allows ease of stripping and termination.

The cables have been independently tested and approved by Evoxa / Warrington Fire to AS/NZS 3013 for both fire and mechanical properties. They have also been certified to electrical standard AS 5000.2 and communication / wiring standard AS/ACIF S008.

It is a requirement of AS/NZS 1670.1, 1670.4, 1668.1 & 4214 that cables be approved to AS/NZS 3013 and AS/ACIF S008.

]]> Speaker AS7240.24 http://fireandsafetywa.com.au/product/speaker-as7240-24/ Sat, 13 Oct 2018 08:27:42 +0000 https://fireandsafetywa.com.au/?post_type=product&p=4511 Full range 4” ceiling loudspeaker, which features five power taps at 100V line for 6W, 3W, 1.5W, 0.75W and 0.375W outputs. An optional surface mount box is available for solid ceiling or wall installation.

]]> Vigilant WIP Phone (RED) http://fireandsafetywa.com.au/product/vigilant-wip-phone-red/ Sun, 07 Oct 2018 13:37:02 +0000 https://fireandsafetywa.com.au/product/vigilant-wip-phone-red/ The Vigilant Warden Intercom Point (WIP) Phone RED is designed specifically for use with sound and intercommunication systems for emergency purposes. WIP phones are used by wardens to communicate between evacuation zones and the intercom control and indication equipment (c.i.e.). When the handset is lifted, a call is automatically initiated to the intercom c.i.e. The FP0938 has been certified as complying with AS/ACIF S004 and has been submitted for approval as a WIP phone for intercommunication systems for emergency purposes complying with AS 2220.1 and installed to AS 1670.4 at both the c.i.e. and the WIP locations.

Specifications
Operating Voltage (Current): 6V (at 9mA) d.c. to 15V d.c. (at 22.5mA)
AC Impedance: 600 ohms off-hook
AC Impedance: 25 – 50 ohms on-hook
Ring Voltage: 6V a.c. r.m.s.
Ring SPL: approx. 82dBA @ 1m
Ambient Temperature: -10°C to + 50°C
Terminals: Screw, to suit 0.75mm2 to
Terminals: 1.5mm2 wire
Terminals: 1 Pair Line IN
Terminals: 1 Pair Line OUT or ELD resistor
Terminals: 1 Pair SPKR – do not use
Dimensions (on hook) (mm): 215H x 70W x 70D
Material: Impact Resistant ABS
Colour: Red

]]> WIP Phone Surface Mounting Enclosure http://fireandsafetywa.com.au/product/wip-phone-surface-mounting-enclosure/ Sun, 07 Oct 2018 13:37:02 +0000 https://fireandsafetywa.com.au/product/wip-phone-surface-mounting-enclosure/ The Warden Intercom Point (WIP) Phone Surface Mount Enclosure is designed for use in Emergency Warning Systems, for protection of Warden Intercom Points (WIPs) against impact. The enclosure door is held closed by a magnetic catch. The enclosure is open-backed and is finished in red powder coat.

Specifications
Material: Mild Steel
Finish: Red Powdercoat
Dimensions(HWD): 386mm x 156mm x 155mm
Weight: 1.8kg

]]> WIP Ring Speaker 87mm, 4W 8 Ohm Paper Cone http://fireandsafetywa.com.au/product/wip-ring-speaker-87mm-4w-8-ohm-paper-cone/ Sun, 07 Oct 2018 13:37:02 +0000 https://fireandsafetywa.com.au/product/wip-ring-speaker-87mm-4w-8-ohm-paper-cone/ The WIP Ring Speaker 87mm unit is great as a replacement speaker. Diagonal mounting hole sentres at 100mm. Over all Depth is 32mm.

Specifications
Nominal Impedance 8 ± 1.2 ohms At 500Hz
V.C Resistance 7.6 ± 0.53 ohms
Resonance Frequency 200±40Hz
Power Handling (Rated Power) 3 Watts (IEC STD)
MAX .Power 4 Watts
Sensitivity 85±3dB At 200/400/600/800/1000 Hz 1W/1M
Frequency Range Fo-20 KHz deviation -10db
Nominal Impedance 8 ± 1.2 ohms At 500Hz
V.C Resistance 7.6 ± 0.53 ohms
Resonance Frequency 200±40Hz
Power Handling (Rated Power) 3 Watts (IEC STD)
MAX .Power 4 Watts
Sensitivity 85±3dB At 200/400/600/800/1000 Hz 1W/1M
Frequency Range Fo-20 KHz deviation -10dbMagnet: Ø45mm x Ø22mm x 8mm Ferrite
Operating Temperature: -20ºC to +60ºC
Housing: Metal
Diaphragm Material: Paper
Weight: 145g

]]> Dual Strobe(Red/Amber) c/w Surface Mounting Base 24VDC http://fireandsafetywa.com.au/product/dual-strobered-amber-c-w-surface-mounting-base-24vdc/ Sun, 07 Oct 2018 13:37:02 +0000 https://fireandsafetywa.com.au/product/dual-strobered-amber-c-w-surface-mounting-base-24vdc/ The Dual Strobe (Red/Amber) c/w Surface Mounting Base 24VDC unit is for applications where a two stage alarm system or two distinct visable signals are required. The robust housing comes complete with four self tapping screws for fastening and four screw covers for aesthetics. The dual strobes operate at 24 volts to provide a 2.6 Joule output at appproximately 100 flashes per minute. At high voltages, the flash rate will be correspondingly higher. The strobes may be powered in tandem over a two wire circuit or independently over a 4 wire circuit. As standard, The Dual Strobe has “ALERT” and “EVACUATE” labelling for the amber and red lamp assemblies that are raintight and made from high impact resistant ABS.

Specifications
Operating Voltage: 20 to 30VDC
Operating Current: 160mA
Flash Energy: 2.6J
Operating Temp: -30°C to +60°C
Relative Humidity: 10 to 95% (not cond.)
Dimensions (HWD): 250mm x 150mm x 80mm
Weight: 450g

]]> KAC Manual Call Point (White) with Surface Box http://fireandsafetywa.com.au/product/kac-manual-call-point-white-with-surface-box/ Sun, 07 Oct 2018 13:37:02 +0000 https://fireandsafetywa.com.au/product/kac-manual-call-point-white-with-surface-box/ The KAC Manual Call Point with Surface Box (White) is surface mounting, with a plastic coated glass element to ensure reliable, safe operation. It is coloured white for EWIS applications. The call point is operated when the glass element is snapped, releasing the MCP’s micro switch, which signals an alarm to the EWIS panel. The element is snapped by pressing on its centre – a hammer, or other impact device, is not required.

Specifications
Max Current: 2A @ 30Vdc
Contact Resistance: 100mOhm. (max)
Legend: Emergency Alarm
Ambient Temp: -10 to +55°C
Relative Humidity: 95% (non cond.)
Ingress Protection: IP24D
Dimensions (HWD): 93 x89 x 60 mm

]]> 10W Plastic Horn Speaker – IP66 Rated – Small inc. Capacitor http://fireandsafetywa.com.au/product/10w-plastic-horn-speaker-ip66-rated-small-inc-capacitor/ Sun, 07 Oct 2018 13:36:32 +0000 https://fireandsafetywa.com.au/product/10w-plastic-horn-speaker-ip66-rated-small-inc-capacitor/ Although the 10W Plastic Horn Speaker – IP66 Rated – Small inc. Capacitor is suitable for general paging applications, it has been primarily designed with sound systems for emergency purposes (evacuation systems) in mind. It is supplied with an in-built bipolar capacitor make it compatible with sound system c.i.e. (EWIS panels) utilising line monitoring circuitry. It is also fitted with a 4-core termination cable, colour coded to provide commection points for loop-in, loop out wiring as required by Australian Standards.

Features
– Compact yet very efficient, with a high SPL of 104dB @ 1W @1m, this horn speaker is ideal for car parks, plant rooms, industrial plans, schools, train/bus stations and airports etc.
– Offers a high dress of speech articulation and program clarity which is essential to meet today’s demanding evacuation standards.
– A screwdriver-adjustable switch is provided to select the desired power tapping.
– Supplied iwht nickel plated mounting hardware.

Specifications
Line Voltage: 100VAC
Power Rating: 10W
Power Taps: 1.25, 2.5, 5, 7.5, 10W
Capacitor: 22µF Bipolar

Sound Pressure Levels
1W @ 1m: 104dB
10W @ 1m: 114dB
Frequency Response: 480Hz to 10kHz
Dispersion Angle: 110°
Dimensions (mm): 180 dia. x 255 deep
Ingress Protection: IP66
Material: UV stabilised ABS
Colour: Grey
Operating Temperature: -30°C to +70°C
Cable Length: 850mm
Mounting Bracket: 3 holes, Ø11mm, 35mm centres

]]> 15W Plastic Horn Speaker – IP55 Rated – Large Cone http://fireandsafetywa.com.au/product/15w-plastic-horn-speaker-ip55-rated-large-cone/ Sun, 07 Oct 2018 13:36:32 +0000 https://fireandsafetywa.com.au/product/15w-plastic-horn-speaker-ip55-rated-large-cone/ The 15W Plastic Horn Speaker – IP55 Rated – Large Cone is designed primarily for distributed paging systems. The speaker has clear speech reproduction to ensure intelligibility of announcements and has power taps that are adjustable to suit the power rating of the amplifier for the area to be covered. It is supplied with a 22µF bipolar capacitor for line monitoring and a 4 core flying lead for loop-in, loop out wiring connections as required by Australian Standards. Each speaker has nickel-chromium plated mild steel hardware included, making them ideal for awuatic centre installations.

Features
– Compact yet very efficient, with a high SPL of 108dB @ 1W @1m, this horn speaker is ideal for car parks, plant rooms, industrial plans, schools, train/bus stations and airports etc.
– Offers a high dress of speech articulation and program clarity which is essential to meet today’s demanding evacuation standards.
– Supplied with nickel plated mounting hardware.

Specifications
Power Rating: 20W
Power Taps: 5, 7.5, 10, 15, 20W
Sound Pressure LEvel: 108dB 1W @ 1m, 121dB 20W @ 1m
Frequency Response: 275Hz to 10kHz
Isolation Capacitor: 22µF Bipolar
Dispersion Angle: 70°
Dimensions: (dia x L) 212 x 285mm
Ingression Protection: IP55

]]>