4100 – Fire & Safety WA

4100ES Panel

AJBPIKE — Sun, 07 Oct 2018 13:31:13 +0000

The 4100ESi compact is a preassembled single loop fire alarm control panel available off the shelf and comes equipped with he following:
1 x CPU and 4100ESi colour touch screen LCD controller with 2 Gig onboard memory card and Ethernet port
1 x 10 Amp power supply which has 5 amps available for external use
1 x Remote unit interface board (RUI) designed to connect LCD anunciator or remote transponder units (RTUs)
1 x MX 250 device addressable loop
3 x 24V outputs
3 x NACs these are programmable to supply a monitored 24V output
1 x AUX relay output – 2 Amp rated clean contract programmable relay
3 x Brigade relay outputs
Space for brigade interface (not included please choose option required)
Space to house 1 x 50W tone generator and microphone

Serial LCD Annunciator (4100 FIP only)

AJBPIKE — Sun, 07 Oct 2018 13:31:13 +0000

The Simplex 4603-9101 LCD annunciator provides remote annunciation and control using an 80 character, back-lit, alphanumeric, LCD readout. Information is presented in clear, descriptive English language and includes: point status (alarm, trouble, etc.), alarm type (smoke detector, manual station, etc.), number of system alarms, supervisory conditions, and troubles, and a custom location label. Communications require a single twisted, shielded pair that supports other styles of Simplex serial annunciators on the same wire pair. Alarm, Supervisory, and Trouble conditions are also indicated by dedicated LEDs and a tone-alert. Each condition has a dedicated acknowledge push-button switch that silences the tone-alert but leaves the LED on until all conditions in that category are restored to normal. Switch operation is either globally or individually acknowledgeable, determined by the control panel operation. Repeated operation of the appropriate acknowledge switch will scroll the LCD display showing activity in the sequence of occurrence. The tone-alert also sounds to indicate the operation of any of the push-button switches

Specifications
– Operating Voltage 24Vdc, Loop Supplied
– Operating Current 170 mA
– Operating Temp 0 to 49°C
– Relative Humidity 10% to 90% (non-cond)
– Standard Trim Steel, Painted Beige
– Optional Trim Brushed Aluminium 4603-9111
– Trim Dimensions(HW) 114 x 300 mm

Simplex BACpac BACnet Portal with Ethernet Interface

AJBPIKE — Sun, 07 Oct 2018 13:31:13 +0000

The 4100-6069 BACpac Ethernet module provides a supplementary communications interface that converts computer terminal information from a compatible Simplex CIE into the building automation protocol of BACnet. With this module, status information from the CIE can be provided to other components of the building automation network with the detail and information format required. This allows the other systems to properly respond to fire alarm system activity in addition to the primary fire alarm response that is under the control of the CIE.

Specifications
– Input Power 123mA@24Vdc (c.i.e.)
– Data Input from CIE RS232 ASCII
– Data Output BACnet IP
– Operating Temperature 0°C to +45°C
– Reletive Humdity 10% to 93% (non/cond)
– Dimensions (mm) 2654x51x105 (HWD)

TrueStart2 test tool, comes with 24V power pack battery charger, test leads, instructions and carry bag

AJBPIKE — Sun, 07 Oct 2018 13:31:13 +0000

The Simplex TrueSTART II Test Tool is a portable battery-operated test instrument, designed to enable contractors or technicians to quickly verify that all IDNet wiring and peripheral devices are installed correctly and operating properly, even before they are connected to the 4100 fire alarm control panel. The TrueSTART II instrument uses advanced software technology to scan hundreds of addressable fire alarm system devices and pinpoint potential problems, such as ground faults, shorted wiring, or incorrect or duplicate addressing.

Specifications
– Operating Voltage 24 to 40Vdc
– Battery Life (approx.) 6 hours of testing
– Relative Humidity 10% to 95% (n/cond)
– Ambient Temperature 0 to +55°C