MX1 Responders – Fire & Safety WA

MX4428 ADR-M 4mA Detector Current 1901-116

AJBPIKE — Sun, 07 Oct 2018 13:26:15 +0000

The FP0755 version of ADR supports the 15V MCP, the 614 series of detectors and all the other detectors from earlier versions of ADR, along with some new programmable circuit types. The ADR-M and its new version software replaces the existing ADRs for standard production and can be purchased under part numbers listed. The existing ADR part numbers will still be available in low quantities for service replacements and upgrades. Please note that the new ADR-M software MUST NOT be installed in any existing 2.5mA or 4mA ADR PCBs as it will not work properly

MXR Responder in Box

AJBPIKE — Sun, 07 Oct 2018 13:26:15 +0000

The MXP has two major functions:
1. To provide an interface to an MX4428 responder (communications/power)loop, via which data gathered by the MXR may be transferred to the MX4428 Master for display, annunciation, and processing as approiate.
2. To provide an interface to the MX Analogue loop. Data retrieved from the MX devices connected to the analogue loop is processed to determine the ALARM/NORMAL/FAULT status of each device, and this data is passed onto the MX4428 Master via the MX4428 loop interface.

The analogue loop interface also allows outputs to be sent to those devices that support them, to initiate MX device tests,activate relays.

MX Loop Filter Board

AJBPIKE — Sun, 07 Oct 2018 13:26:15 +0000

The MXP Loop Filter board is available for fitting to an MXP in order to further improve common-mode interference suppression that may occur as a result of the MXP detector loop not being adequately separated from power wiring, lift motors etc.

Specifications
– Operating Supply 20 to 40Vdc
– Dimensions
– Height 70 mm
– Width 20 mm
– Depth 25mm