MX Hazardous Detectors/Devices – Fire & Safety WA

MX 801PHEx Intrinsically Safe (I.S) Photoelectric & Heat Detector

AJBPIKE — Sun, 07 Oct 2018 13:29:54 +0000

The 801PHEx Intrinsically Safe Optical Smoke & Heat Detector plugs into a 5BEx base. The detector is designed to transmit to a remote MX fire controller, digital signals which represent the status of the optical smoke and heat elements of the detector. Software within the controller interprets the returned optical and heat values to raise an alarm or other appropriate response according to the type of programmed configuration.

The mode of detector may be:
– Optical smoke only detector (High/ Normal/Low)
– HPO smoke detector (sensitivity High, Normal or Low)
– Heat only rate-of-rise (A1R) detector (no sensitivity selection)
– Heat fixed temperature 60°C (A2S) (no sensitivity selection)
– Optical (sensitivity High, Normal or Low) combined with heat fixed temperature 60°C (A2S)
– HPO (sensitivity High, Normal or Low) combined with heat fixed temperature 60°C (A2S)

These detectors are designed to comply with EN 50 014 and EN 50 020 for intrinsically safe apparatus.

They are certified:
– ATEX Code: Ex II 1G
– IECEX Code: Ex ia IIC T5
– Cenelec Code: EEx ia IIC T5

Specifications
– Operating Voltage 18 to 24Vdc
– Queiscent Current 400µA (max.)
– Alarm Current 3.5mA (max.)
– Operating Tempearture -25°C to +70°C
– Relative Humidity 10% to 95% (non-cond.)
– FPANZ Listed VF/351
– IECEX Certificate IECEX BAS 07.0063X

MX 801CHEx Intrinsically Safe (I.S) Carbon Monoxide & Heat Detector

AJBPIKE — Sun, 07 Oct 2018 13:29:54 +0000

The 801CHEx Intrinsically Safe Carbon Monoxide plus Heat Detector forms part of the 800Ex Intrinsically Safe Series of MX Addressable Fire Detectors. The detector plugs into a 5BEx base. The detector is designed to transmit to a remote MX fire controller, digital signals which represent the status of the carbon monoxide and heat elements of the detector. Software within the controller is used to interpret the returned Carbon Monoxide and heat values to raise an alarm or other appropriate response according to the programmed configuration.

The mode of detector may be:
– Heat only detector (A1R or A2S) (sensitivity: High, Normal or Low)
– Compensated Carbon Monoxide detector (sensitivity: High, Normal or Low)
– Compensated Carbon Monoxide detector (sensitivity: High or Normal ) combined with heat (A1R)

These detectors are designed to comply with EN 50 014 and EN 50 020 for intrinsically safe apparatus.

They are certified:
– ATEX Code: Ex II 1G
– IECEX Code: Ex ia IIC T5
– Cenelec Code: EEx ia IIC T5

Specifications
– Operating Voltage 18 to 24Vdc
– Queiscent Current 400µA (max.)
– Alarm Current 3.5mA (max.)
– Operating Tempearture 0°C to +50°C
– Relative Humidity 15% to 90% (non-cond.)
– FPANZ Listed VF/352
– IECEX Certificate IECEX BAS 07.0063X

MX 801HEx Intrinsically Safe (I.S) Heat Detector

AJBPIKE — Sun, 07 Oct 2018 13:29:54 +0000

The 801HEx Intrinsically Safe Heat Detector forms part of the 800Ex Intrinsically Safe Series of MX Addressable Fire Detectors. The detector plugs into a 5BEx base. The detector is designed to transmit to a remote MX fire controller, digital signals which represent the status of the heat element of the detector. Software within the controller is used to interpret the returned heat values to raise an alarm or other appropriate response according to the programmed configuration.

The mode of detector may be:
– EN54-5 A1R, rate-of-rise normal ambient
– EN54-5 A2S, fixed 60°C
– EN54-5 CR, rate-of-rise high ambient

These detectors are designed to comply with EN 50 014 and EN 50 020 for intrinsically safe apparatus.

They are certified:
– ATEX Code: Ex II 1G
– IECEX Code: Ex ia IIC T5
– Cenelec Code: EEx ia IIC T5

MX CP840Ex Intrinsically Safe(I.S) Manual Callpoint

AJBPIKE — Sun, 07 Oct 2018 13:29:54 +0000

The CP840Ex Intrinsically Safe Waterproof Break Glass Manual Call Point is designed to monitor and signal the condition of the switch contact associated with the call point. The callpoint is designed to comply with EN 50 014 and EN 50 020 for intrinsically safe apparatus.

It is certified:
– IECEX Certificate BAS 07.0063X
– ATEX Classification Ex II 1 G
– ATEX Certificate BAS01ATEX1394X
– Cenelec Classification EEx ia IIC T5

The CP840Ex does not comply with NZS4512.

Specifications
– Operating Voltage 18 to 24Vdc
– Queiscent Current 300µA (max.)
– Alarm Current 5mA (max.)
– Operating Tempearture -25°C to +70°C
– Relative Humidity 10% to 95% (non-cond.)
– Dimensions (HWD) 124 x 124 x 59 mm
– Ingress Protection IP67
– ATEX Certificate BAS01ATEX1394X
– IECEX Certificate BAS 07.0063X