Installing a VESDAnet Interface Card into a VLF detector and connecting to a VESDAnet offers many benefits. VESDAnet allows sophisticated configuration, monitoring and control from local or remote sites. So rather than a technician having to connect to each
VESDA smoke detector individually (sometimes installed high above floor level), they can communicate with all detectors on the network from a central, convenient, location using a PC. VESDAnet also allows a system management package (such as Xtralis
VSM4) to monitor and report on the status of all devices connected on VESDAnet, facilitating central supervision, management and control of all VESDA detectors. By installing a VN Card in a VLF detector, remote displays and remote relays can be added to the VLF. This extends the capability and flexibility of the VLF detector.

Features
– Provides seamless VESDAnet fault-tolerant communication
– Quick and simple to install
– Minimal configuration required
– Diagnostic LEDs give visual indication of the card’s status
– Fully transferrable between Xtralis VESDA VLF detectors

Specifications
Power Consumption: Consumes less than 1 W from the detector at 24 VDC & 42 mA.
Dimensions (LxWxH): 137 mm (5¼”) x 71 mm (2 13/16”) x 20 mm (13/16”)
Weight: 0.08 kg (0.176 lb)
Terminals: 0.2 – 2.5 mm2 (30-12 AWG)
Operating Conditions
Tested to: -10 to 55°C (14 to 131°F)
Detector Ambient: 0 to 40°C (32 to 104°F)
Humidity: 5% to 95% (non-condensing)

Installing a VLF LaserFOCUS Relay Expansion Card into a VLF detector provides enhanced benefits and a cost-effective solution for customers who need enhanced connectivity, fault detection and monitoring, and annunciation of alarms and faults. The principal benefits include:
– Improved FACP Connectivity: The VLF is fitted with two (2) alarm relays in its standard form. With an extra two (2) relays, the Multi-function Control Card allows reporting of all four (4) alarm levels on dry relay outputs.
– Enhanced Annunciation: An MPO (Monitored 24 V Powered Output) is available on the VLF LaserFOCUS Relay Expansion Card. The MPO provides power to devices such as sirens or strobes, and monitors the line integrity.

Features
– Provides two (2) additional relays
– Provides an extra General Purpose Input (GPI) with line monitoring
– Quick and simple to install
– Out-of-the-box operation, with minimal configuration required for extra features
– Diagnostic LEDs give visual indication of the card’s status
– Fully compatible with Xtralis VESDA VLF smoke detectors

Specifications
Dimensions
Length x Width x Height 110 mm (41/3”) x 70 mm (2 3/4”) x 20 mm (13/16”)
Weight 0.08 kg (0.176 lb)
Terminals 0.2 – 2.5 mm2 (30-12 AWG)

Installing a VLF LaserFOCUS Relay Multifuction Control Card detector provides enhanced benefits and a cost-effective solution for customers who need enhanced connectivity, fault detection and monitoring, and annunciation of alarms and faults. The principal benefits include:
– Improved FACP Connectivity: The VLF is fitted with two (2) alarm relays in its standard form. With an extra two (2) relays, the Multi-function Control Card allows reporting of all four (4) alarm levels on dry relay outputs.
– Enhanced Annunciation: An MPO (Monitored 24 V Powered Output) is available on the VLF LaserFOCUS Relay Multifuction Control Card. The MPO provides power to devices such as sirens or strobes, and monitors the line integrity.
– Enhanced Control and Fault Detection: With a VLF MCC installed, a VLF has two (2) General Purpose Inputs (GPIs), allowing, for example, one GPI to report on loss of mains power and the other GPI to be used as a reset input.

Features
– Provides two (2) additional relays
– Provides an extra General Purpose Input (GPI) with line monitoring
– Quick and simple to install
– Out-of-the-box operation, with minimal configuration required for extra features
– Diagnostic LEDs give visual indication of the card’s status
– Fully compatible with Xtralis VESDA VLF smoke detectors
– Selection between 3rd relay or 24 V Monitored Powered Output (MPO)

Specifications
Dimensions
Length x Width x Height 110 mm (41/3”) x 70 mm (2 3/4”) x 20 mm (13/16”)
Weight 0.08 kg (0.176 lb)
Terminals 0.2 – 2.5 mm2 (30-12 AWG)

The Relays Only model is used as a single stand-alone smoke detecor and is not connected into VESDAnet. Programming this detector is by connecting to a PC with a RS232 communication cable to the 9-pin programming socket on the termination card located inside the detector.

The VESDAnet model is used when the detector is to connected into VESDAnet. This detector can be used as a stand-alone device and not connected into VESDAnet as well.

Specifications
– Dimensions 256 x 183 x 92 mm
– Weight 2kg
– Area Coverage 250m2

The Relays Only model is used as a single stand-alone smoke detecor and is not connected into VESDAnet. Programming this detector is by connecting to a PC with a RS232 communication cable to the 9-pin programming socket on the termination card located inside the detector.

The VESDAnet model is used when the detector is to connected into VESDAnet. This detector can be used as a stand-alone device and not connected into VESDAnet as well.

Specifications
– Dimensions 256 x 183 x 92 mm
– Weight 2kg
– Area Coverage 250m2