Fire Detection – Fire & Safety WA http://fireandsafetywa.com.au Mon, 31 Aug 2020 02:10:12 +0000 en-AU hourly 1 https://wordpress.org/?v=5.2.21 http://fireandsafetywa.com.au/wp-content/uploads/2018/04/cropped-favicon-32x32.png Fire Detection – Fire & Safety WA http://fireandsafetywa.com.au 32 32 TPS 2 Core Cable http://fireandsafetywa.com.au/product/tps-2-core-cable/ Tue, 16 Oct 2018 13:18:13 +0000 https://fireandsafetywa.com.au/product/tps-2-core-cable-2/ Our TPS cables are ideally suited for Fire Alarm, OWS and EWIS systems. The cables are double insulated and have an outer sheath which is easy to strip and terminate.

In addition to the basic flat design, a white stripe cable is available to distinguish between speaker and detection circuits. Twisted cable is ideal for the connection of addressable fire panels to detectors and devices. The twisted screen version is ideal for VESDA networks and other communication networks.

]]> Fire Rated 2 Core Cable http://fireandsafetywa.com.au/product/fire-rated-2-core-cable/ Tue, 16 Oct 2018 13:18:13 +0000 https://fireandsafetywa.com.au/product/fire-rated-2-core-cable-2/ Our Fire Rated cables have been specifically designed for use with Australian Fire Alarm and Evacuation systems. The cables have a reduced outside diameter which allows 2 cables to fit within a single conduit providing ease of installation. The cable’s 7 stranded copper conductors and firm insulation material also allows for neat placement on cable trays and allows ease of stripping and termination.

The cables have been independently tested and approved by Evoxa / Warrington Fire to AS/NZS 3013 for both fire and mechanical properties. They have also been certified to electrical standard AS 5000.2 and communication / wiring standard AS/ACIF S008.

It is a requirement of AS/NZS 1670.1, 1670.4, 1668.1 & 4214 that cables be approved to AS/NZS 3013 and AS/ACIF S008.

]]> Speaker AS7240.24 http://fireandsafetywa.com.au/product/speaker-as7240-24/ Sat, 13 Oct 2018 08:27:42 +0000 https://fireandsafetywa.com.au/?post_type=product&p=4511 Full range 4” ceiling loudspeaker, which features five power taps at 100V line for 6W, 3W, 1.5W, 0.75W and 0.375W outputs. An optional surface mount box is available for solid ceiling or wall installation.

]]> 19″ Rack c/w 4 Blanks http://fireandsafetywa.com.au/product/19-rack-c-w-4-blanks/ Sun, 07 Oct 2018 15:26:38 +0000 https://fireandsafetywa.com.au/product/19-rack-c-w-4-blanks/ To compliment the VESDA range of detectors, displays and programmers in a 19 inch subrack enclosure is available. The 19 inch rack enclosure is designed to house up to 12 display and/or programmer modules, VESDAnet sockets, or relay only modules
in a wide variety of configurations to suit the particular requirements of a site where centralised control and monitoring of the VESDA system is required. VESDA Aspirating Smoke Detectors (ASD) are available in a wide range of configurations to suit the particular requirements of each site. The system is modular with Display and Programmer Modules located in the most convenient location. The backbone to this modularity is VESDAnet, a fault tolerant RS485 communications loop which links all elements of the VESDA system together.

Mounting Options
Display and Programmer modules can be mounted in a Detector Enclosure, in a Remote Box or in a 19 inch subrack. A Hand-held programmer module is also available for temporary and convenient connection to the VESDA system. Details of these standard mounting options are given in the Detector, Display and Programmer Data sheets.

Relay Signalling
Each Display Module can be configured to drive relays which can be used for reliable (fault tolerant) signalling of Fire and Fault conditions to external systems. Standard Display Modules can drive 7 relays while VESDA VLS Display Modules can be configured to drive 7 or 12 relays. Relay functionality is fully configurable according to site requirements.

19 inch Rack Enclosure
19 inch subracks can be installed in glass fronted enclosures and are mounted on a swing frame for convenient connection of all the cables. Cable entry for 24 VDC power, VESDAnet connection and interfacing to the relays is provided by multiple knock-outs on all four sides of the box. 19 inch subracks and blank panels must be ordered separately. Each enclosure will accommodate up to 3 subracks. If utilising only 1 or 2 racks the VESDA Power Supply (VPS-100-US-xxx) can also be mounted in the enclosure.

Features
– Dual hinged glass door provides easy access to VESDA modules and termination boards
– Second door provides access to the termination boards
– Designed for easy mounting
– Multiple knock-outs for easy cable entry
– Holds up to 3 subracks
– Full size, lockable window and door

Technical Specifications
Construction:
– NEMA 1 Rating
– 16 gauge cold roll steel
– Fully welded and ground
– Double knockouts
– Continuous hinges with stainless steel pins
– Full size window kit – lockable
– Door – lockable (keyed alike with window)
Mounting: Key hole mounting
Finish: 2-part polyurethane – bake on textured finish
Color: Light grey
Locks: Keyed alike Chicago locks
Blanking Plates:
– 14 gauge cold roll steel
– Light grey matching color
– Single plate – 19 x 51/4 ”
– Double plate – 19 x 101/2″
– Enclosure requires 4 10/32″ screws for mounting 19 inch rack and/or blanking plates

]]> Vigilant WIP Phone (RED) http://fireandsafetywa.com.au/product/vigilant-wip-phone-red/ Sun, 07 Oct 2018 13:37:02 +0000 https://fireandsafetywa.com.au/product/vigilant-wip-phone-red/ The Vigilant Warden Intercom Point (WIP) Phone RED is designed specifically for use with sound and intercommunication systems for emergency purposes. WIP phones are used by wardens to communicate between evacuation zones and the intercom control and indication equipment (c.i.e.). When the handset is lifted, a call is automatically initiated to the intercom c.i.e. The FP0938 has been certified as complying with AS/ACIF S004 and has been submitted for approval as a WIP phone for intercommunication systems for emergency purposes complying with AS 2220.1 and installed to AS 1670.4 at both the c.i.e. and the WIP locations.

Specifications
Operating Voltage (Current): 6V (at 9mA) d.c. to 15V d.c. (at 22.5mA)
AC Impedance: 600 ohms off-hook
AC Impedance: 25 – 50 ohms on-hook
Ring Voltage: 6V a.c. r.m.s.
Ring SPL: approx. 82dBA @ 1m
Ambient Temperature: -10°C to + 50°C
Terminals: Screw, to suit 0.75mm2 to
Terminals: 1.5mm2 wire
Terminals: 1 Pair Line IN
Terminals: 1 Pair Line OUT or ELD resistor
Terminals: 1 Pair SPKR – do not use
Dimensions (on hook) (mm): 215H x 70W x 70D
Material: Impact Resistant ABS
Colour: Red

]]> WIP Phone Surface Mounting Enclosure http://fireandsafetywa.com.au/product/wip-phone-surface-mounting-enclosure/ Sun, 07 Oct 2018 13:37:02 +0000 https://fireandsafetywa.com.au/product/wip-phone-surface-mounting-enclosure/ The Warden Intercom Point (WIP) Phone Surface Mount Enclosure is designed for use in Emergency Warning Systems, for protection of Warden Intercom Points (WIPs) against impact. The enclosure door is held closed by a magnetic catch. The enclosure is open-backed and is finished in red powder coat.

Specifications
Material: Mild Steel
Finish: Red Powdercoat
Dimensions(HWD): 386mm x 156mm x 155mm
Weight: 1.8kg

]]> WIP Ring Speaker 87mm, 4W 8 Ohm Paper Cone http://fireandsafetywa.com.au/product/wip-ring-speaker-87mm-4w-8-ohm-paper-cone/ Sun, 07 Oct 2018 13:37:02 +0000 https://fireandsafetywa.com.au/product/wip-ring-speaker-87mm-4w-8-ohm-paper-cone/ The WIP Ring Speaker 87mm unit is great as a replacement speaker. Diagonal mounting hole sentres at 100mm. Over all Depth is 32mm.

Specifications
Nominal Impedance 8 ± 1.2 ohms At 500Hz
V.C Resistance 7.6 ± 0.53 ohms
Resonance Frequency 200±40Hz
Power Handling (Rated Power) 3 Watts (IEC STD)
MAX .Power 4 Watts
Sensitivity 85±3dB At 200/400/600/800/1000 Hz 1W/1M
Frequency Range Fo-20 KHz deviation -10db
Nominal Impedance 8 ± 1.2 ohms At 500Hz
V.C Resistance 7.6 ± 0.53 ohms
Resonance Frequency 200±40Hz
Power Handling (Rated Power) 3 Watts (IEC STD)
MAX .Power 4 Watts
Sensitivity 85±3dB At 200/400/600/800/1000 Hz 1W/1M
Frequency Range Fo-20 KHz deviation -10dbMagnet: Ø45mm x Ø22mm x 8mm Ferrite
Operating Temperature: -20ºC to +60ºC
Housing: Metal
Diaphragm Material: Paper
Weight: 145g

]]> Dual Strobe(Red/Amber) c/w Surface Mounting Base 24VDC http://fireandsafetywa.com.au/product/dual-strobered-amber-c-w-surface-mounting-base-24vdc/ Sun, 07 Oct 2018 13:37:02 +0000 https://fireandsafetywa.com.au/product/dual-strobered-amber-c-w-surface-mounting-base-24vdc/ The Dual Strobe (Red/Amber) c/w Surface Mounting Base 24VDC unit is for applications where a two stage alarm system or two distinct visable signals are required. The robust housing comes complete with four self tapping screws for fastening and four screw covers for aesthetics. The dual strobes operate at 24 volts to provide a 2.6 Joule output at appproximately 100 flashes per minute. At high voltages, the flash rate will be correspondingly higher. The strobes may be powered in tandem over a two wire circuit or independently over a 4 wire circuit. As standard, The Dual Strobe has “ALERT” and “EVACUATE” labelling for the amber and red lamp assemblies that are raintight and made from high impact resistant ABS.

Specifications
Operating Voltage: 20 to 30VDC
Operating Current: 160mA
Flash Energy: 2.6J
Operating Temp: -30°C to +60°C
Relative Humidity: 10 to 95% (not cond.)
Dimensions (HWD): 250mm x 150mm x 80mm
Weight: 450g

]]> KAC Manual Call Point (White) with Surface Box http://fireandsafetywa.com.au/product/kac-manual-call-point-white-with-surface-box/ Sun, 07 Oct 2018 13:37:02 +0000 https://fireandsafetywa.com.au/product/kac-manual-call-point-white-with-surface-box/ The KAC Manual Call Point with Surface Box (White) is surface mounting, with a plastic coated glass element to ensure reliable, safe operation. It is coloured white for EWIS applications. The call point is operated when the glass element is snapped, releasing the MCP’s micro switch, which signals an alarm to the EWIS panel. The element is snapped by pressing on its centre – a hammer, or other impact device, is not required.

Specifications
Max Current: 2A @ 30Vdc
Contact Resistance: 100mOhm. (max)
Legend: Emergency Alarm
Ambient Temp: -10 to +55°C
Relative Humidity: 95% (non cond.)
Ingress Protection: IP24D
Dimensions (HWD): 93 x89 x 60 mm

]]> FTDI Cable 1.5M http://fireandsafetywa.com.au/product/ftdi-cable-1-5m/ Sun, 07 Oct 2018 13:36:32 +0000 https://fireandsafetywa.com.au/product/ftdi-cable-1-5m/ Open-area Smoke Imaging Detection (OSID) by Xtralis is a new innovation in projected beam smoke detection technology. By using advanced dual wavelength projected beams and optical imaging technology for early warning smoke detection, OSID provides a low-cost, reliable and easy-to-install solution that overcomes typical` beam detection issues such as false alarm incidents and alignment difficulties. OSID systems may be configured to protect a range of spaces, regardless of shape. The protection zone or “fire web” is determined by the placement of OSID detectors. Multi-emitter solutions provide a true 3D arrangement.

OSID innovatively combines two technologies to reliably detect smoke in large, open spaces by using two wavelengths of light to detect particles, the system in able to distinguish between particle sizes. The shorter UV wavelength interacts strongly with both small and large particles, while the longer IR wavelength is affected predominantly by larger particles. Dual-wavelength path loss measurement therefore enable the detector to provide repeatable smoke obscuration values, while rejecting the presense of dust particles or solid intruding objects.
An optical imaging array in the oSID detector provides a wider viewing angle to locate and capture images. Consequently, the system is easier to instal and align and can compensate for drift aused by natural shifts in building structures. Optical filtering, high-speed image acquisition, and intelligent software algorithms also enable the OSID detector to process images and provide new levels of stability and sensitivity while providing high tolerance to high-level lighting variability.

Features
OSID’s uncompromising performance is based on the patented use of digital imaging, dual-frequency beams and smart algorithms delivering:
– Patented dual wavelength, UV & IR, particle detection
– CMOS Imager with wide viewing angles
– Simple installation, commissioning and maintenance
– High tolerance to vibration and structural movement
– High tolerance to dust, fogging, steam, relections and object intrusion
– High resistance to reflected sunlight
– On-board log memory
– Software tool for diagnostic purposes
– Aesthetically discreet and 3D coverage
– Long range up to 150m (492 ft.) with minimal free space

Specifications
FTDI Cable 1.5 Metres
Allows to connect to a PC and hence OSID Diagnostic SW to the Imager. The FTDI cable can be extended with another 20m using a cable with an active USB amplifier.

]]>